LND2000 Electric Nail files manicure pedicure art drill machine
1,Easy to use dialing speed control,
2,Forward and reverse operation swith,
3,Up to 25000RPM,
4, Extremely quiet and smooth - No Vibration,
5,Fashion design for comfrt grip,
6,Nail machine stand inclued,
7,Foot pedal for easy operation .
Main (power supply & Control) part
Rated voltage range:110-240V 50/60Hz
Output rated voltage :DC12V,1.0A
Rated power input:10W
No load speed:25000RPM
Enginery,Twist-lock handpiece ,holder ,a set of bits
Out package: 12pcs/ctn Carton size: 55*48*39 cm
The Nail file art machine Operation Manual
A. Installation and wire connection the nail file art machine :
1,Connect the 5-pin plug of the nail file art machine portable grinding head /hand piece to the OUTPUT socket at the main panel .
2,Connect the nail file art machine pedal switch to the FOOT S/W socket.
3,Select grinding mould of different sizes according to actual requirements, and fasten it into the front of the portable grinding head of the nail file art machine .
4,Switch the speed control of the nail file art machine to the left.
5,Connect with the main source power for the nail file art machine .
B. Nail file art machine operation :
1,Press the nail file art machine funtion switch on the right to HAND for manual control ,the indicator of the nail file art machine will be on.
2,Turn the nail file art machine SPEED CONTROL to the right to accelerate the grinding head.
3,When the funtion switch of nail file art machine is pressed to FOOT,step on the pedal the speed will be acceleerated,and loose the foot,the speed will decrease(foot switch is optional)
4,The turning directions of this nail file art machine can be swapped: FWD means chockwise direction and REV means counterclosckwise direction.
5,Adjust the speed of the nail file art machine grinding head within a resonable range.
C.Instructions of this nail file art machine :
1,Don’t change the turning directions of this nail file art machine too frequently,otherwise it will damage the grinding head of nail file art machine .
2,Turn the nail file art machine SPEED CONTROL counterclockwise to decelerate the grinding head to the minimum before turning off and switch the main power source to O .
3,After the nail file art machine operation,put the grinding head on the top of the main panel.
4,While the grinding head of the nail file art machine is in operation,never pull out the 5-pin plug of the portable grinding head.
5,For long idle time of the nail file art machine ,pls.disconnect the source power.
6,Any unauthorized disassembling of the nail file art machine is prohibited. In case of any breakdown for the nail file art machine ,pls.contact the agent or authorized repair center. We promise swift, high-quality and satisfactory service.
Different angles of Electric Nail files manicure pedicure art drill machine:
If you are interest in our products,pls.feel free to contract us, we will reply you in 12 hours.